surface mountable fast soft recovery diode v f < 1.2v @ 8a t rr = 55ns v rrm 200 to 600v ir series 8ewf..s i2124 rev. b 10/99 to-252aa (d-pak) the 8ewf..s fast soft recovery ir rectifier series has been optimized for combined short reverse recovery time, low forward voltage drop and low leakage current the glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. typical applications are both: output rectification and freewheeling diode in inverters, choppers and converters. input rectifications where severe restrictions on conducted emi should be met. description/features package outline i f(av) sinusoidal waveform 8 a v rrm 200 to 600 v i fsm 170 a v f @ 8 a, t j = 25c 1.2 v t rr @ 1a, 100a/s 55 ns t j - 40 to 150 c major ratings and characteristics characteristics 8ewf..s units www.vishay.com 1 document number: 93160
i2124 rev. b 10/99 8ewf..s ir series i f(av) max. average forward current 8 a @ t c = 96 c, 180 conduction half sine wave i fsm max. peak one cycle non-repetitive 170 10ms sine pulse, rated v rrm applied surge current 200 10ms sine pulse, no voltage reapplied i 2 t max. i 2 t for fusing 140 10ms sine pulse, rated v rrm applied 200 10ms sine pulse, no voltage reapplied i 2 t max. i 2 t for fusing 2000 a 2 s t = 0.1 to 10ms, no voltage reapplied voltage ratings part number v rrm , maximum v rsm , maximum non repetitive i rrm peak reverse voltage peak reverse voltage 150c vvma 8ewf02s 200 300 3 8ewf04s 400 500 8ewf06s 600 700 absolute maximum ratings parameters 8ewf..s units conditions t rr reverse recovery time 140 ns i f @ 8apk i rr reverse recovery current 2.6 a @ 25a/s q rr reverse recovery charge 0.25 c @ t j = 25c s snap factor tb/ta 0.5 - parameters 8ewf..s units conditions a a 2 s v fm max. forward voltage drop 1.2 v @ 8a, t j = 25c r t forward slope resistance 16 m ? v f(to) threshold voltage 1.13 v i rm max. reverse leakage current 0.1 t j = 25 c 3t j = 150 c electrical specifications parameters 8ewf..s units conditions t j = 150c v r = rated v rrm ma typical reverse recovery characteristics t i fm t rr q rr i rr di dt tb ta document number: 93160 www.vishay.com 2
i2124 rev. b 10/99 8ewf..s ir series t j max. junction temperature range - 40 to 150 c t stg max. storage temperature range - 40 to 150 c soldering temperature 240 c for 10 seconds r thjc max. thermal resistance junction 2.5 c/w dc operation to case r thja typ. thermal resistance junction 50 c/w to ambient (pcb mount)** wt approximate weight 1(0.03) g (oz.) case style to-252aa (d-pak) thermal-mechanical specifications parameters 8ewf..s units conditions **when mounted on 1" square (650mm 2 ) pcb of fr-4 or g-10 material 4 oz (140m) copper 40c/w for recommended footprint and soldering techniques refer to application note #an-994 fig. 1 - current rating characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 2 - current rating characteristics 60 70 80 90 100 110 120 130 140 150 0123456789 30 60 90 120 180 maximum allowable case temperature ( c) condu cti on angl e average forward current (a) 8ewf..s ser ies r (dc) = 2.5 c/w thjc 70 80 90 100 110 120 130 140 150 02468101214 dc 30 60 90 120 180 maximum allowable case temperature ( c) conduction period average forward current (a) 8ewf..s series r (dc) = 2.5 c/w thjc 0 2 4 6 8 10 12 0123456789 rms limit 180 120 90 60 30 con duction angl e average forward current (a) maximum average forward power loss (w) 8ewf..s series t = 150 c j 0 2 4 6 8 10 12 14 16 02468101214 dc 180 120 90 60 30 rms limit conduction period average forward current (a) maximum average forward power loss (w) 8ewf..s series t = 150 c j document number: 93160 www.vishay.com 3
i2124 rev. b 10/99 8ewf..s ir series fig. 6 - maximum non-repetitive surge current fig. 5 - maximum non-repetitive surge current fig. 7 - forward voltage drop characteristics fig. 8 - recovery time characteristics, t j = 25c fig. 9 - recovery time characteristics, t j = 150c 50 75 100 125 150 175 200 1 10 100 number of equal amplitude half cycle current pulses (n) peak half sine wave forward current (a) initial t = 150 c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j 8ewf..s series at any rated load condition and with rated v applied following surge. rrm 40 60 80 100 120 140 160 180 200 0.01 0.1 1 pulse train duration (s) peak half sine wave forward current (a) versus pulse train duration. initial t = 150 c no voltage reapplied rated v reapplied rrm j maximum non repetitive surge current 8ewf..s series 1 10 100 0.511.522.53 t = 25 c j instantaneous forward current (a) instantaneous forward voltage (v) t = 150 c j 8ewf..s series 0 0.1 0.2 0.3 0.4 0 40 80 120 160 200 rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a maximum reverse recovery time - trr (s) 8ewf..s series t = 25 c j i = 20 a fm 8 a 2 a 0 0.1 0.2 0.3 0.4 0 40 80 120 160 200 rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a m axi mum re verse re c o ve ry t im e - t rr (s) 8ewf..s series t = 150 c j i = 20 a fm 2 a 8 a document number: 93160 www.vishay.com 4
i2124 rev. b 10/99 8ewf..s ir series fig. 10 - recovery charge characteristics, t j = 25c fig. 11 - recovery charge characteristics, t j = 150c fig. 12 - recovery current characteristics, t j = 25c fig. 13 - recovery current characteristics, t j = 150c fig. 14 - thermal impedance z thjc characteristics 0 0.2 0.4 0.6 0.8 1 1.2 1.4 0 40 80 120 160 200 rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a maximum reverse recovery charge - qrr (c) 8ew f..s series t = 25 c i = 20 a fm 2 a j 8 a 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 0 40 80 120 160 200 rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a maximum reverse recovery charge - qrr (c) 8ewf..s series t = 150 c j i = 20 a fm 2 a 8 a 0 2 4 6 8 10 12 14 16 0 40 80 120 160 200 maximum reverse recovery current - irr (a) rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a 8ewf..s series t = 25 c j i = 20 a fm 2 a 8 a 0 2 4 6 8 10 12 14 16 18 20 0 40 80 120 160 200 maximum reverse recovery current - irr (a) rate of fall of forward current - di/dt (a/s) 1 a 5 a 10 a 8ewf..s series t = 150 c i = 20 a fm 2 a j 8 a 0.1 1 10 0.0001 0.001 0.01 0.1 square wave pulse duration (s) steady state value (dc operation) single pulse thjc 8ewf..s series d = 0. 50 d = 0. 33 d = 0. 25 d = 0. 17 d = 0. 08 transient thermal impedance z ( c/w) document number: 93160 www.vishay.com 5
i2124 rev. b 10/99 8ewf..s ir series ordering information table 8 e w f 06 s trl 1 5 2 4 3 6 7 1 - current rating 2 - circuit configuration: e = single diode 3 - package: w = d-pak 4 - type of silicon: f = fast soft recovery rectifier 5 - voltage code: code x 100 = v rrm 6 - s = surface mountable 7 - tape and reel option: trl = left orientation reel trr = right orientation reel 02 = 200v 04 = 400v 06 = 600v device code dimensions in millimeters and (inches) outline t able 6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20) 4 1.27 (0. 05) 0.88 (0. 03) 5.97 (0. 23) 1 - anode 2 - cathode 3 - anode 4 - cathode 1.64 (0.02) 1.52 (0.06) 1.15 (0.04) 1.14 (0.04) 0.76 (0.03) 2x 2.28 (0.09) 2x 0.89 (0.03) 0.64 (0.02) 3x 4. 57 (0.18) 123 6.22 (0.24) 2.38 (0.09) 2.19 (0.08) 6.45 (0.24) 5.68 (0.22) 10.42 (0.41) 9.40 (0.37) 0.46 (0.02) 0.58 (0.02) 1.14 (0.04) 0. 89 (0.03) 0.51 (0.02) min. 0. 58 (0.02) 0.46 ( 0.02) minimum recommended f ootprint 5.97 (0.24) 10.67 (0.42) 1.65 (0.06) 6.48 (0. 26) 2x 2.54 (0. 10) 2x 2.28 (0.09) 2x base cat hode cat hode anod e anode 4 12 3 document number: 93160 www.vishay.com 6
i2124 rev. b 10/99 8ewf..s ir series tape & reel information tr feed direction 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 12.1 (0.48) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 11.9 (0.47) 1.85 (0.07) to-252aa tape & reel when ordering, indicate the part number, part orientation, and the quantity. quantities are in multiples of 2,000 pieces per reel for tr and multiples of 3,000 pieces per reel for both trl and trr. 13 (0.52) dia. dia. max. 375 (14.17) 50 (1.97) dia. 22.4 (0.88) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 6.8 (0.26) 7.0 (0.28) trr feed direction 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 8.1 (0.32) 1.85 (0.07) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 7.9 (0.31) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 10.4 (0.41) 10.6 (0.42) dia. trl feed direction 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 8.1 (0.32) 1.85 (0.07) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 7.9 (0.31) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 10.4 (0.41) 10.6 (0.42) dia. dia. dia. dia. dia. marking information example: this is an 8ewf06s 5k3a 8ewf06s 9712 international rectifier logo part number date code (yyww) yy = year ww = week assembly lot code 4 (k) 1 (a) 3 (a) 2 (k) www.vishay.com 7 document number: 93160
i2124 rev. b 10/99 8ewf..s ir series world headquarters: 233 kansas st., el segundo, california 90245 u.s.a. tel: (310) 322 3331. fax: (310) 322 3332. european headquarters: hurst green, oxted, surrey rh8 9bb, u.k. tel: ++ 44 1883 732020. fax: ++ 44 1883 733408. ir canada: 15 lincoln court, brampton, markham, ontario l6t3z2. tel: (905) 453 2200. fax: (905) 475 8801. ir germany: saalburgstrasse 157, 61350 bad homburg. tel: ++ 49 6172 96590. fax: ++ 49 6172 965933. ir italy: via liguria 49, 10071 borgaro, torino. tel: ++ 39 11 4510111. fax: ++ 39 11 4510220. ir far east: k&h bldg., 2f, 30-4 nishi-ikebukuro 3-chome, toshima-ku, tokyo, japan 171. tel: 81 3 3983 0086. ir southeast asia: 1 kim seng promenade, great world city west tower,13-11, singapore 237994. tel: ++ 65 838 4630. ir taiwan: 16 fl. suite d.207, sec. 2, tun haw south road, taipei, 10673, taiwan. tel: 886 2 2377 9936. data and specifications subject to change without noti ce. www.vishay.com 8 document number: 93160
legal disclaimer notice vishay document number: 99901 www.vishay.com revision: 12-mar-07 1 notice the products described herein were acquired by vishay intertechnology, inc., as part of its acquisition of international rectifier?s power control systems (pcs) business, which closed in april 2007. specifications of the products displayed herein are pending review by vishay and are subject to the terms and conditions shown below. specifications of the products displayed herein are subject to change without notice. vishay intertechnology, inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale. international rectifier ? , ir ? , the ir logo, hexfet ? , hexsense ? , hexdip ? , dol ? , intero ? , and powirtrain ? are registered trademarks of international rectifier corporation in the u.s. and other countries. all other product names noted herein may be trademarks of their respective owners.
|
